X.H3

X.H3 Single-phase complete sumbersible pump (1x220-230V / 50 Hz)

4” complete pump made of stainless steel ZDS hydraulic part, ZDS single-phase PSC encapsulated water-cooled H3 motor, ZDS Control Box (which includes start and run capacitor) and supply cable in different lenghts. Reliable, strong and easy to maintain, it's available in a wide range of models. These submersible pumps are designed to be used in 4" boreholes (or larger) and thanks, for lifting, distribution, pressurization of water in water systems.

Küldjön nekünk megkeresést!

kW: 0,25 - 2,2
Voltage range: 1x220-230V / 50Hz
Voltage tolerance 50Hz from nominal: +6% / -10% U_n
Degree of protection: IP68
Maximum quantity of suspended sand: 600 g/m³
Insulation: F
Rated ambient temperature: maximum 35^° C
Cooling flow: min 8 cm/sec
Mounting: vertical/horizontal
Maximum delivery (Q): 15.000 l/h
Maximum head (H): 220 m
Maximum immersion depth: 300 m
Outlet diameter: 1" ¼ G-F, 2" G-F
Allowed range of water pH: 6,4 - 8,0

Automatikus védelmek

Túlterhelés elleni védelem

The ZDS Control Box protects the X.H3 complete pump against overload. In case the pump is partially or totally blocked, the overload protection in the ZDS Control Box stops the pump to protect it.

Teljesítmény-adatok

Letöltés

A megfelelő telepítés

If you are using a generator with an internal combustion engine, it is necessary that the generator’ s power measured in kW (in continuous delivery) is three times the rated power in kW of the submersible pump.
We recommend to install a proper cooling jacket in installations bigger than 10 cm, to guarantee the correct motor cooling flow.

Galéria

Töltse le a katalógusunkat!

Az árakat is tartalmazó katalógus letöltéséhez lépjen be or regisztráljon

Letöltés